Thingiverse
Compound Bow Stand
por cncope
11
Descargas
11
Likes
0
Makes
Compound Bow Stand
The original model has been adjusted for better printability if you need to print the stand vertically.
Fasten the legs with M5 Allen bolts, 20 mm long. There are holes in the legs for M5 threaded inserts. Use at least a 3 mm wall thickness due to the inserts.
The legs also have holes so the stand can be attached to a larger plate if needed.
The original model has been adjusted for better printability if you need to print the stand vertically.
Fasten the legs with M5 Allen bolts, 20 mm long. There are holes in the legs for M5 threaded inserts. Use at least a 3 mm wall thickness due to the inserts.
The legs also have holes so the stand can be attached to a larger plate if needed.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
