Thingiverse
CR-10s Solid Bed Mount
von ilikecake1
13
Downloads
6
Likes
0
Makes
I have upgraded my CR-10s with an ABL kit from [TH3D](https://www.th3dstudio.com/product/ezabl-pro-plug-print-auto-bed-leveling-kit/) and I heard that a solid bed mount would be a good idea. I could not find one that was compatible with my drag chain, so I made my own. This is vaguely similar to the solid bed mounts that TH3D sells, but modified to fit over the arms on the lower bed mounts of the CR-10s. The way these parts fit, the drag chain end and camera mount cannot rotate after installation.
If you don't have a drag chain for your heated bed, the part will probably still work fine for strain relief. If there is any interest, I could probably make a simplified version that can be used for strain relief only
At a minimum, you will need three of 'Solid Bed Mount, Normal' and one of 'Solid Bed Mount, Drag Chain Bed End'. If you want to mount a webcam onto the bed mount, replace one of the 'Solid Bed Mount, Normal' parts with 'Solid Bed Mount, Camera Mount, Long Version'. You wi
If you don't have a drag chain for your heated bed, the part will probably still work fine for strain relief. If there is any interest, I could probably make a simplified version that can be used for strain relief only
At a minimum, you will need three of 'Solid Bed Mount, Normal' and one of 'Solid Bed Mount, Drag Chain Bed End'. If you want to mount a webcam onto the bed mount, replace one of the 'Solid Bed Mount, Normal' parts with 'Solid Bed Mount, Camera Mount, Long Version'. You wi
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
