Thingiverse

CR-10s Solid Bed Mount

by ilikecake1

13 Downloads

6 Likes

0 Makes

I have upgraded my CR-10s with an ABL kit from [TH3D](https://www.th3dstudio.com/product/ezabl-pro-plug-print-auto-bed-leveling-kit/) and I heard that a solid bed mount would be a good idea. I could not find one that was compatible with my drag chain, so I made my own. This is vaguely similar to the solid bed mounts that TH3D sells, but modified to fit over the arms on the lower bed mounts of the CR-10s. The way these parts fit, the drag chain end and camera mount cannot rotate after installation.

If you don't have a drag chain for your heated bed, the part will probably still work fine for strain relief. If there is any interest, I could probably make a simplified version that can be used for strain relief only

At a minimum, you will need three of 'Solid Bed Mount, Normal' and one of 'Solid Bed Mount, Drag Chain Bed End'. If you want to mount a webcam onto the bed mount, replace one of the 'Solid Bed Mount, Normal' parts with 'Solid Bed Mount, Camera Mount, Long Version'. You wi

auto bed leveling bed leveling CR-10 CR-10s CR10 cr10s Creality drag chain logitech Logitech C270 Logitech Webcam solid bed supports webcam webcam mount auto bed leveling bed leveling CR-10 CR-10s CR10 cr10s Creality drag chain logitech Logitech C270 Logitech Webcam solid bed supports webcam webcam mount

Source

Thingiverse

What you need to print this: Beginner Low confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format