Cute dragon

Just a cute dragon, version 4 or 6 colors. Can be rescaled just remember not to change the Z axis. I recommend using the cold plate. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:BAMBULAB BASIC BLACK Distance: 0.6BAMBULAB BASIC BLUE GRAY Distance: 3.0BAMBULAB BASIC LILA PURPLE Distance: 2.0BAMBULAB BASIC JADE WHITE Distance: 5.0 Swap Instructions:Start with BlackAt layer #09 (0.8mm) swap to Blue GrayAt layer #16 (1.36mm) swap to Lila PrupleAt layer #23 (1.92mm) swap to Jade White for the rest How to do more than 4 colors on a single AMS?To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges.Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS:Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1