Thingiverse
Delta Effector
von gaderchen
0
Downloads
1
Likes
0
Makes
About Assembly
--> All using M3 screw : )
1) Cooling fan : M3 x 20 - 4 pcs (screw hole dia need reduce a bit)
2) Upper cover and lower bracket : M3 X 20 - 4 pcs (need 4 pcs nut)
Note:
a. Please check print part size and adjust before print it.
b. Please attention the heater and extrude head not on CAD , therefore please careful the gap dimension between extrude head and lower bracket.
c. Change the delta effector the print dimension scale will be different.
--> All using M3 screw : )
1) Cooling fan : M3 x 20 - 4 pcs (screw hole dia need reduce a bit)
2) Upper cover and lower bracket : M3 X 20 - 4 pcs (need 4 pcs nut)
Note:
a. Please check print part size and adjust before print it.
b. Please attention the heater and extrude head not on CAD , therefore please careful the gap dimension between extrude head and lower bracket.
c. Change the delta effector the print dimension scale will be different.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!