Thingiverse
Delta Effector
door gaderchen
0
Downloads
1
Likes
0
Makes
About Assembly
--> All using M3 screw : )
1) Cooling fan : M3 x 20 - 4 pcs (screw hole dia need reduce a bit)
2) Upper cover and lower bracket : M3 X 20 - 4 pcs (need 4 pcs nut)
Note:
a. Please check print part size and adjust before print it.
b. Please attention the heater and extrude head not on CAD , therefore please careful the gap dimension between extrude head and lower bracket.
c. Change the delta effector the print dimension scale will be different.
--> All using M3 screw : )
1) Cooling fan : M3 x 20 - 4 pcs (screw hole dia need reduce a bit)
2) Upper cover and lower bracket : M3 X 20 - 4 pcs (need 4 pcs nut)
Note:
a. Please check print part size and adjust before print it.
b. Please attention the heater and extrude head not on CAD , therefore please careful the gap dimension between extrude head and lower bracket.
c. Change the delta effector the print dimension scale will be different.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!