Thingiverse
Dimensional Accuracy Test
von jaisor
30
Downloads
16
Likes
1
Makes
Simple and quick to print dimensional accuracy test model. The two pieces should fit together snugly, all the way and should be able to come apart with some effort.
It can be used to check dimensional compatibility of different printers as well: Print a set from each printer and try to cross-fit them.
Most slicers have a setting to adjust the dimensional accuracy. In Cura, this is under Shell -> Horizontal Expansion. Negative values if too tight. Positive if too loose. For most of my printers the right value has been between -0.05 to -0.15
It can be used to check dimensional compatibility of different printers as well: Print a set from each printer and try to cross-fit them.
Most slicers have a setting to adjust the dimensional accuracy. In Cura, this is under Shell -> Horizontal Expansion. Negative values if too tight. Positive if too loose. For most of my printers the right value has been between -0.05 to -0.15
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
