Thingiverse
Dimensional Accuracy Test
door jaisor
30
Downloads
16
Likes
1
Makes
Simple and quick to print dimensional accuracy test model. The two pieces should fit together snugly, all the way and should be able to come apart with some effort.
It can be used to check dimensional compatibility of different printers as well: Print a set from each printer and try to cross-fit them.
Most slicers have a setting to adjust the dimensional accuracy. In Cura, this is under Shell -> Horizontal Expansion. Negative values if too tight. Positive if too loose. For most of my printers the right value has been between -0.05 to -0.15
It can be used to check dimensional compatibility of different printers as well: Print a set from each printer and try to cross-fit them.
Most slicers have a setting to adjust the dimensional accuracy. In Cura, this is under Shell -> Horizontal Expansion. Negative values if too tight. Positive if too loose. For most of my printers the right value has been between -0.05 to -0.15
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
