Thingiverse
Doorbell
von AdrianBates
2
Downloads
5
Likes
0
Makes
A doorbell, designed in a very weird, overly complicated, and probably naïve way.
A little background: I wanted to design an entire doorbell that would work using a small wireless button. I settled on the [Sonoff SNZB-01 Zigbee Switch](https://amzn.to/3Ng2isk) (affiliate link). I also wanted it to "feel" like a doorbell, so I designed it to be used with springs (I used pen springs) to accomplish this.
Please note that this design uses some snap-in pieces, which may or may not work with your print settings, but can usually be coerced with some sanding/cutting. Also, since it's snap-fit, someone could probably rip this off your house if they wanted to.
A little background: I wanted to design an entire doorbell that would work using a small wireless button. I settled on the [Sonoff SNZB-01 Zigbee Switch](https://amzn.to/3Ng2isk) (affiliate link). I also wanted it to "feel" like a doorbell, so I designed it to be used with springs (I used pen springs) to accomplish this.
Please note that this design uses some snap-in pieces, which may or may not work with your print settings, but can usually be coerced with some sanding/cutting. Also, since it's snap-fit, someone could probably rip this off your house if they wanted to.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
