Thingiverse
Doorbell
por AdrianBates
2
Descargas
5
Likes
0
Makes
A doorbell, designed in a very weird, overly complicated, and probably naïve way.
A little background: I wanted to design an entire doorbell that would work using a small wireless button. I settled on the [Sonoff SNZB-01 Zigbee Switch](https://amzn.to/3Ng2isk) (affiliate link). I also wanted it to "feel" like a doorbell, so I designed it to be used with springs (I used pen springs) to accomplish this.
Please note that this design uses some snap-in pieces, which may or may not work with your print settings, but can usually be coerced with some sanding/cutting. Also, since it's snap-fit, someone could probably rip this off your house if they wanted to.
A little background: I wanted to design an entire doorbell that would work using a small wireless button. I settled on the [Sonoff SNZB-01 Zigbee Switch](https://amzn.to/3Ng2isk) (affiliate link). I also wanted it to "feel" like a doorbell, so I designed it to be used with springs (I used pen springs) to accomplish this.
Please note that this design uses some snap-in pieces, which may or may not work with your print settings, but can usually be coerced with some sanding/cutting. Also, since it's snap-fit, someone could probably rip this off your house if they wanted to.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
