Double dome camera mount

Camera mount for two, 111mm diameter dome cameras. (I used Hikvison DS-2CD2145FWD-IS)
I designed the console with hidden screws so that only two screws can be seen from below, behind the cameras. The two halves of the console are held together by a groove. The groove and the entire console are designed so that rainwater cannot flow in! The cameras can be screwed up horizontally in 10-degree increments. The console is optimized for FDM technology. I suggest printing the top few millimeters of the larger part with a smaller layer thickness!
To fasten the two parts together
- 2pcs M6 hexnut
- 2pcs M6 12mm hex socket head cap screw with internal allen key