Thingiverse
Double dome camera mount
door Tachion
32
Downloads
30
Likes
0
Makes
Camera mount for two, 111mm diameter dome cameras. (I used Hikvison DS-2CD2145FWD-IS)
I designed the console with hidden screws so that only two screws can be seen from below, behind the cameras. The two halves of the console are held together by a groove. The groove and the entire console are designed so that rainwater cannot flow in! The cameras can be screwed up horizontally in 10-degree increments. The console is optimized for FDM technology. I suggest printing the top few millimeters of the larger part with a smaller layer thickness!
To fasten the two parts together
- 2pcs M6 hexnut
- 2pcs M6 12mm hex socket head cap screw with internal allen key
I designed the console with hidden screws so that only two screws can be seen from below, behind the cameras. The two halves of the console are held together by a groove. The groove and the entire console are designed so that rainwater cannot flow in! The cameras can be screwed up horizontally in 10-degree increments. The console is optimized for FDM technology. I suggest printing the top few millimeters of the larger part with a smaller layer thickness!
To fasten the two parts together
- 2pcs M6 hexnut
- 2pcs M6 12mm hex socket head cap screw with internal allen key
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
