Thingiverse
Electronics Case Left Side Geeetech A10
von Estep
33
Downloads
8
Likes
0
Makes
Geeetech A10 Electronics Case Left Side for the Geeetech Mainboard GT2560 V3.0
This case fits on the outer left extrusions and makes the accessibility of the electronics much easier, than the original case underneath the Printer.
Together with the "LCD Display Holder Left Side" I made, this works very well, but you need to have different feet for the printer. They need to be at least 20 mm in height. You can find some damping feet which are adjustable in height, on my Thingiverse.
If you don't use the Display Holder for the left side, you will need a longer cabel to the LCD-Display
Additional Parts needed:
4 Screws M4x6mm
4 T-Nuts M4
Optional:
LCD Display Holder Left Side Geeetech A10: https://www.thingiverse.com/thing:4098947
Silicone damping feet with adjustable height: https://www.thingiverse.com/thing:4108039
This case fits on the outer left extrusions and makes the accessibility of the electronics much easier, than the original case underneath the Printer.
Together with the "LCD Display Holder Left Side" I made, this works very well, but you need to have different feet for the printer. They need to be at least 20 mm in height. You can find some damping feet which are adjustable in height, on my Thingiverse.
If you don't use the Display Holder for the left side, you will need a longer cabel to the LCD-Display
Additional Parts needed:
4 Screws M4x6mm
4 T-Nuts M4
Optional:
LCD Display Holder Left Side Geeetech A10: https://www.thingiverse.com/thing:4098947
Silicone damping feet with adjustable height: https://www.thingiverse.com/thing:4108039
Estep veröffentlicht auch auf
43 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
