Thingiverse
Electronics Case Left Side Geeetech A10
di Estep
33
Download
8
Likes
0
Makes
Geeetech A10 Electronics Case Left Side for the Geeetech Mainboard GT2560 V3.0
This case fits on the outer left extrusions and makes the accessibility of the electronics much easier, than the original case underneath the Printer.
Together with the "LCD Display Holder Left Side" I made, this works very well, but you need to have different feet for the printer. They need to be at least 20 mm in height. You can find some damping feet which are adjustable in height, on my Thingiverse.
If you don't use the Display Holder for the left side, you will need a longer cabel to the LCD-Display
Additional Parts needed:
4 Screws M4x6mm
4 T-Nuts M4
Optional:
LCD Display Holder Left Side Geeetech A10: https://www.thingiverse.com/thing:4098947
Silicone damping feet with adjustable height: https://www.thingiverse.com/thing:4108039
This case fits on the outer left extrusions and makes the accessibility of the electronics much easier, than the original case underneath the Printer.
Together with the "LCD Display Holder Left Side" I made, this works very well, but you need to have different feet for the printer. They need to be at least 20 mm in height. You can find some damping feet which are adjustable in height, on my Thingiverse.
If you don't use the Display Holder for the left side, you will need a longer cabel to the LCD-Display
Additional Parts needed:
4 Screws M4x6mm
4 T-Nuts M4
Optional:
LCD Display Holder Left Side Geeetech A10: https://www.thingiverse.com/thing:4098947
Silicone damping feet with adjustable height: https://www.thingiverse.com/thing:4108039
Estep pubblica anche su
43 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
