grbl_mill

##grbl_mill

* fully printable
* large parts are printed with a 0.8 mm nozzle
* smaller parts with a 0.4 mm nozzle
* completly designed with openSCAD
* derived from http://www.thingiverse.com/thing:44854
* you need the MCAD library https://github.com/SolidCode/MCAD

####Usage

* open grbl_mill_main.scad in openSCAD to view the assembled mill
* you can select the viewed part in the main file by commenting out the appropriate line
* in grbl_mill_const.scad you can adjust the main construction
* in the division Configuration you can configure the width (count) of profiles for each direction separatly
* there are some more flags to configuring the mill
* some tuning is done directly in grbl_mill_parts.scad
* all things are downloadable

####Working Area

* xy: 107.5 mm x 84.3 mm
* z = about 40 - 50 mm, depending from tool and using the t-nut profiles
* is enough for milling pcbs or hobbed bolts

####Profiles
* using alu profiles from http://www.kinetikm