Hueforge Apero in progress!

Hueforge Apero en cours ! Boost MeBoostez-moi s'il vous plaît, c'est gratuit :DMembershipMerci de me soutenir dans mon travail. Projet: Apero en cours.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 204.92x245mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.64mm and the Actual Thickness is 2.48mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #cc0000 PLA BambuLab Basic Red Transmission Distance: 5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 5.5 #ffffff PLA Sunlu White Transmission Distance: 7This print uses 4 unique filamentsInstructions de changements: Commencer par Charcoal At layer #8 (0.72mm) swap to Red At layer #15 (1.28mm) swap to Yellow At layer #22 (1.84mm) swap to White pour le reste. Please leave a comment and like if you like my Hueforge. Thank you very much.Non-commercial !!! Non-commercial !!! Non-commercial !!! Non-commercial