Hueforge Bottle Jack Daniel's

Hueforge Bottle Jack Daniel'sMembershipThank you for supporting me in my work.Boost Meboost me please :p:dProject: Bottle Jack Daniel's.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 151.54x450mm in sizeYou may print at higher layer heights below the Base Thickness of 0.8mmThe Max allowed Thickness is 2.8mm and the Actual Thickness is 2.8mm Filaments Used: #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #383838 PLA BambuLab Dark Grey Transmission Distance: 0.2 #cc0000 PLA BambuLab Basic Red Transmission Distance: 5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 5.5 #ffffff PLA Sunlu White Transmission Distance: 7This print uses 5 unique filaments Swap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to Dark Grey At layer #12 (1.04mm) swap to Red At layer #19 (1.6mm) swap to Yellow At layer #26 (2.16mm) swap to White for the rest. Please leave a comment and like if you like my Hueforge. Thank you