Hueforge Gaming

Hueforge Gaming Boost MeBoost me please, it's free :DMembershipThank you for supporting me in my work. Project: eat sleep game repeat.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 230x217.8mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.6mm and the Actual Depth is 2.4mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Cyan Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 5.5This print uses 4 unique filaments Swap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to Cyan At layer #15 (1.28mm) swap to Red At layer #22 (1.84mm) swap to Yellow for the rest. Please leave a comment and like if you like my Hueforge. Thank you very much.Non-commercial !!! Non-commercial !!! Non-commercial !!! Non-commercial !!!