MakerWorld
Hueforge & Lithophane
Voir le modèle
HUEFORGE GMC
17
Téléchargements
20
Likes
12
Makes
HUEFORGE GMC Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Jade White Transmission Distance: 4 PLA Protopasta Out of Darts Orange Transmission Distance: 11 !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Black At layer #4 (0.44mm) swap to Jade White At layer #10 (0.92mm) swap to Out of Darts Orange for the rest. ADVISE: If you want to change the color of the car, instead of orange, use the one you like best.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
