Hueforge Goldorak

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 141.4x200mm in sizeYou may print at higher layer heights below the Min Depth of 1mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Blue Transmission Distance: 4 PLA Bambulab Basic Pumpkin Orange Transmission Distance: 5.5 PLA Bambulab Basic Sunflower Yellow Transmission Distance: 4.8 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 1.2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 8 unique filaments Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Red At layer #20 (1.68mm) swap to Blue At layer #23 (1.92mm) swap to Pumpkin Orange At layer #27 (2.24mm) swap to Sunflower Yellow At layer #29 (2.4mm) swap to Blue Gray At layer #31 (2.56mm) swap to Gray At layer #34 (2.8mm) swap to Jade White for the rest.