hueforge harry potter

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 111.96x200mm in size You may print at higher layer heights below the Min Depth of 0.64mm The Max Depth is 2mm and the Actual Depth is 1.5mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 2 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Jade White for the rest. commencer par le noir à la couche 12 changer pour le blanc pour le reste