Hueforge Helmet VR46

Hueforge Helmet VR46Boost MeBoost me please :p:dProject: helmet vr46.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 204.93x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 3mm and the Actual Depth is 3mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Marine Blue Transmission Distance: 1.5 PLA Sunlu + Green Transmission Distance: 3 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 5.5 PLA Sunlu White Transmission Distance: 7This print uses 6 unique filaments Swap Instructions: Start with Charcoal At layer #9 (0.8mm) swap to Marine Blue At layer #12 (1.04mm) swap to Green At layer #16 (1.36mm) swap to Red At layer #21 (1.76mm) swap to Yellow At layer #28 (2.32mm) swap to White for the rest. Please leave a comment and like if you like my Hueforge. Thank you very much.Non-commercial !!!