Hueforge Jack Daniel's

Hueforge Jack Daniel'sMembershipThank you for supporting me in my work.Boost Meboost me please :p:dProject: jack daniels2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 137.75x245mm in sizeYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.8mm and the Actual Depth is 2.9mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Dark Grey Transmission Distance: 0.2 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 5.5 PLA Sunlu White Transmission Distance: 7This print uses 5 unique filaments Swap Instructions: Start with Charcoal At layer #11 (0.96mm) swap to Dark Grey At layer #12 (1.04mm) swap to Red At layer #19 (1.6mm) swap to YellowBorder Only Colors from here until the end. At layer #26 (2.16mm) swap to White for the rest. Please leave a comment and like if you like my Hueforge. Thank you very much.Non-commercial !!!