MakerWorld
Hueforge & Lithophane
Model downloaden
HUEFORGE LEWIS HAMILTON
22
Downloads
22
Likes
13
Makes
HUEFORGE LEWIS HAMILTON Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm The Model is 176.41x250mm in size You may print at higher layer heights below the Min Depth of 0.2mm The Max Depth is 2mm and the Actual Depth is 1.9mm Filaments Used: PLA BambuLab Tough Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA Kexcelled Red Transmission Distance: 4.5 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #2 (0.28mm) swap to Dark Brown At layer #4 (0.44mm) swap to Red At layer #8 (0.76mm) swap to Jade White At layer #20 (1.72mm) swap to Yellow for the rest.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
