HUEFORGE MUSTANG RED

Project: HUEFORGE MUSTANG RED Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm The Model is 140.67x250mm in size You may print at higher layer heights below the Min Depth of 0.2mm The Max Depth is 2mm and the Actual Depth is 1.7mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #4 (0.44mm) swap to Jade White At layer #15 (1.32mm) swap to Red for the rest.