Hueforge RedBull

Hueforge RedBull Boost MeBoost me please :p:dProject: redbull.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 240x160.36mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.8mm and the Actual Depth is 2.9mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA Bambu Basic Bronze Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 5.5 PLA Sunlu White Transmission Distance: 7This print uses 6 unique filaments Swap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Bronze At layer #9 (0.8mm) swap to Blue At layer #14 (1.2mm) swap to Red At layer #21 (1.76mm) swap to Yellow At layer #28 (2.32mm) swap to White for the rest. Please leave a comment and like if you like my Hueforge. Thank you very much.Non-commercial !!!