Hueforge Retro Game

Hueforge Retro Game Boost MeIt's free, boost me please :pMembershipThank you for supporting me in my work. Project: pacman.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 162.65x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 3.1mm and the Actual Depth is 3mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Cyan Transmission Distance: 2.2 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 5.5 PLA Sunlu White Transmission Distance: 7This print uses 6 unique filamentsSwap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to Cyan At layer #13 (1.12mm) swap to Cobalt Blue At layer #15 (1.28mm) swap to Red At layer #20 (1.68mm) swap to Yellow At layer #27 (2.24mm) swap to White for the rest. Please leave a comment and like if you like my Huef