MakerWorld
Hueforge & Lithophane
Go to Model
Hueforge Rockstar
30
Downloads
11
Likes
6
Makes
Hueforge RockstarBoost MeBoost me please :p it's free :DMembershipThank you for supporting me in my work. Project: Rockstar.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 230x216.69mm in sizeYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 2.6mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA Sunlu White Transmission Distance: 7 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 5.5This print uses 4 unique filaments Swap Instructions: Start with Charcoal At layer #9 (0.8mm) swap to White At layer #18 (1.52mm) swap to Red At layer #23 (1.92mm) swap to Yellow for the rest. Please leave a comment and like if you like my Hueforge. Thank you very much.Non-commercial !!! Non-commercial !!! Non-commercial !!! Non-commercial !!!
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
