Hueforge - Ryu Street Fighter

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.7mm and the Actual Depth is 1.8mmFilaments Used: PLA Black Transmission Distance: 0.6 PLA Jade White Transmission Distance: 5 PLA Red Transmission Distance: 4 PLA Silver Transmission Distance: 3.2This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Jade White At layer #13 (1.12mm) swap to Red At layer #18 (1.52mm) swap to Silver for the rest.