HueForge - Sprunki FanBot

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.52mmThe Max allowed Thickness is 2.28mm and the Actual Thickness is 2.28mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.84mm) swap to Blue Gray At layer #15 (1.32mm) swap to Blue At layer #20 (1.72mm) swap to Yellow for the rest.