Hueforge VW Beetle 53

Hueforge VW Kaefer 53 Boost MeBoost me please. It's free :)MembershipThank you for supporting me in my work. Project: 53.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 160x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.6mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Marine Blue Transmission Distance: 1.5 PLA BambuLab Dark Grey Transmission Distance: 0.2 PLA Sunlu White Transmission Distance: 7 PLA BambuLab Basic Red Transmission Distance: 5This print uses 5 unique filaments Swap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Marine Blue At layer #11 (0.96mm) swap to Dark Grey At layer #12 (1.04mm) swap to White At layer #20 (1.68mm) swap to Red for the rest. Please leave a comment and like if you like my Hueforge. Thank you very much.Non-commercial !!! Non-commercial !!! Non-commercial !!! Non-