Hypercube Evolution Additions/Mods

I'll try to modify these if I get feedback.
Other Hypercue Usefule Things from me:
https://www.thingiverse.com/thing:2426811

1. -BLTouch Mount V3, this should not require modifications to the original carrier and should be interchangeable with an inductive sensor. Its meant to use a 3mm Tap on the plastic and the screw kit recommended should have M3 screws that will suit this purpose.

2. -45mm Bracket Slotted with a 15mm long slot, this was requested on facebook. This might limit your nut selection.

3. -100mm Spacer for easy of assembling dual Z-axis frame

4. -100mm Spacer for easy of assembling dual Z-axis frame, that only prints at 118mm long

5. -3030 3D joined connector Endcaps and Endcaps: https://www.thingiverse.com/thing:2426811

6. -10mm Cut Jig for silicone tube heated bed supports and 10, 11, 12, and 13 mm cutting jig, just put a second razor in the end of the distance you need.

7. -"Retainer_1.1" Hot End Retainer that is 1mm thinner. The stock one did