Thingiverse
Label container
by Jakwit
29
Downloads
38
Likes
1
Makes
Created this "Label container" to hold my fridge labels. I use theese labels to mark my food boxes.
Instead of keeping them in a drawer, I made this box that could hang on the refrigerator using magnets.
I made some holes behinde the box. This is where the magnets should be glued on.
The measurement for the magnets are 1mm thick with a diameter of 10mm.
The size of the label sheets are 120mm x 76mm and the pen has a diameter of 10mm.
This can of course also be mounted by using double-sided tape.
Instead of keeping them in a drawer, I made this box that could hang on the refrigerator using magnets.
I made some holes behinde the box. This is where the magnets should be glued on.
The measurement for the magnets are 1mm thick with a diameter of 10mm.
The size of the label sheets are 120mm x 76mm and the pen has a diameter of 10mm.
This can of course also be mounted by using double-sided tape.
Jakwit also publishes on
12 additional models across 2 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
