Thingiverse
Label container
por Jakwit
29
Descargas
38
Likes
1
Makes
Created this "Label container" to hold my fridge labels. I use theese labels to mark my food boxes.
Instead of keeping them in a drawer, I made this box that could hang on the refrigerator using magnets.
I made some holes behinde the box. This is where the magnets should be glued on.
The measurement for the magnets are 1mm thick with a diameter of 10mm.
The size of the label sheets are 120mm x 76mm and the pen has a diameter of 10mm.
This can of course also be mounted by using double-sided tape.
Instead of keeping them in a drawer, I made this box that could hang on the refrigerator using magnets.
I made some holes behinde the box. This is where the magnets should be glued on.
The measurement for the magnets are 1mm thick with a diameter of 10mm.
The size of the label sheets are 120mm x 76mm and the pen has a diameter of 10mm.
This can of course also be mounted by using double-sided tape.
Jakwit también publica en
12 modelos adicionales en 2 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
