Thingiverse
Label container
di Jakwit
29
Download
38
Likes
1
Makes
Created this "Label container" to hold my fridge labels. I use theese labels to mark my food boxes.
Instead of keeping them in a drawer, I made this box that could hang on the refrigerator using magnets.
I made some holes behinde the box. This is where the magnets should be glued on.
The measurement for the magnets are 1mm thick with a diameter of 10mm.
The size of the label sheets are 120mm x 76mm and the pen has a diameter of 10mm.
This can of course also be mounted by using double-sided tape.
Instead of keeping them in a drawer, I made this box that could hang on the refrigerator using magnets.
I made some holes behinde the box. This is where the magnets should be glued on.
The measurement for the magnets are 1mm thick with a diameter of 10mm.
The size of the label sheets are 120mm x 76mm and the pen has a diameter of 10mm.
This can of course also be mounted by using double-sided tape.
Jakwit pubblica anche su
12 modelli aggiuntivi su altre 2 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
