Thingiverse
Label Dispenser
par Amd3
17
Téléchargements
15
Likes
0
Makes
##A Simple Desktop Return Label Dispenser
A through bolt and nut holds the labels in place and makes swapping easier. Designed for "standard labels." Mine were printed by superiorlabels.com.
Design Note: Lower inside edges have fillet to provide a little extra support. Should be plenty sturdy enough for daily use with just PLA.
#NOTE
V5-STL has a larger nut for more tolerance on the fit. It leaves about 2mm of extra space for a loose fit. The v3 was too tight for me to connect. The nut is not needed as the bolt sits nicely in place without it.
A through bolt and nut holds the labels in place and makes swapping easier. Designed for "standard labels." Mine were printed by superiorlabels.com.
Design Note: Lower inside edges have fillet to provide a little extra support. Should be plenty sturdy enough for daily use with just PLA.
#NOTE
V5-STL has a larger nut for more tolerance on the fit. It leaves about 2mm of extra space for a loose fit. The v3 was too tight for me to connect. The nut is not needed as the bolt sits nicely in place without it.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !