Slicer Discord
Large Amazon Echo sphere wall mount – Modelo 3D imprimible de MakerWorld MakerWorld
Electronics

Large Amazon Echo sphere wall mount

25 Descargas
7 Likes
15 Makes
Ver Modelo
I purchased a pair of the higher fidelity Amazon echo devices and wanted to wall mount them so I would have more desk space. These are the LARGE echo sphere devices and sound quite good. You can tell if this will work on yours by turning them over and checking for a ¼" 20 pitch threaded hole in the bottom to mount them. It's the same bolt used for camera tripods. ACE has these bolts but make sure to NOT bottom out the bolt in the threaded insert since it is limited depth. Mine used 1" long bolts, with a washer. I modified the design to make the bottom thicker, and recess the bolt head so you can't see it. This will mean you will probably need a socket to tighten the bolt. Don't over-tighten it.Actually, snug it finger tight and use the echo device itself to turn it so the cables are in the back. There is a slot in the back for cables to go through and down.
Categoría
Electronics
Fuente
MakerWorld
Publicado
Actualizado
Lo que necesitas para imprimir: Intermedio Baja confianza
Pieza única Tornillería requerida
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 1/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
Postprocesado
Tornillería
Software
Cura, PrusaSlicer o similar
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección