Slicer Discord
Large Amazon Echo sphere wall mount – Modello 3D stampabile da MakerWorld MakerWorld
Electronics

Large Amazon Echo sphere wall mount

25 Download
7 Likes
15 Makes
Vai al Modello
I purchased a pair of the higher fidelity Amazon echo devices and wanted to wall mount them so I would have more desk space. These are the LARGE echo sphere devices and sound quite good. You can tell if this will work on yours by turning them over and checking for a ¼" 20 pitch threaded hole in the bottom to mount them. It's the same bolt used for camera tripods. ACE has these bolts but make sure to NOT bottom out the bolt in the threaded insert since it is limited depth. Mine used 1" long bolts, with a washer. I modified the design to make the bottom thicker, and recess the bolt head so you can't see it. This will mean you will probably need a socket to tighten the bolt. Don't over-tighten it.Actually, snug it finger tight and use the echo device itself to turn it so the cables are in the back. There is a slot in the back for cables to go through and down.
Categoria
Electronics
Fonte
MakerWorld
Pubblicato
Aggiornato
Cosa serve per stampare: Intermedio Bassa affidabilità
Pezzo unico Viteria richiesta
Supporti 1/3
Assemblaggio 0/3
Impostazioni 1/3
Dimensioni piano 0/3
Post-lavorazione 1/3
Stampante
FDM / FFF
Formato file
STL
Materiale
Post-elaborazione
Viteria
Software
Cura, PrusaSlicer o simile
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!

Modelli simili

6 Suggerimenti
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione