Thingiverse
LED Strip Bracket
von OrneryMaker
5
Downloads
1
Likes
0
Makes
This thing is a mount for LED strip channel measuring 13mm x 7mm
The model was designed to mount the channel to T-slot extrusion for feature lighting behind my monitors.
The channel is cambered 10° from the horizontal plane. In the case of my installation, slightly leaning the lights towards the wall.
A 2mm hole is located on the back of the mount so that an M3 screw can be used to fix the channel in place should a friction fit not be achieved.
A single 5.3mm hole is used to attach the mount to T-slot using an M5 bolt and T-nut.
This is my first CAD design so please use with that in mind.
The model was designed to mount the channel to T-slot extrusion for feature lighting behind my monitors.
The channel is cambered 10° from the horizontal plane. In the case of my installation, slightly leaning the lights towards the wall.
A 2mm hole is located on the back of the mount so that an M3 screw can be used to fix the channel in place should a friction fit not be achieved.
A single 5.3mm hole is used to attach the mount to T-slot using an M5 bolt and T-nut.
This is my first CAD design so please use with that in mind.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
