Thingiverse
LED Strip Bracket
di OrneryMaker
5
Download
1
Likes
0
Makes
This thing is a mount for LED strip channel measuring 13mm x 7mm
The model was designed to mount the channel to T-slot extrusion for feature lighting behind my monitors.
The channel is cambered 10° from the horizontal plane. In the case of my installation, slightly leaning the lights towards the wall.
A 2mm hole is located on the back of the mount so that an M3 screw can be used to fix the channel in place should a friction fit not be achieved.
A single 5.3mm hole is used to attach the mount to T-slot using an M5 bolt and T-nut.
This is my first CAD design so please use with that in mind.
The model was designed to mount the channel to T-slot extrusion for feature lighting behind my monitors.
The channel is cambered 10° from the horizontal plane. In the case of my installation, slightly leaning the lights towards the wall.
A 2mm hole is located on the back of the mount so that an M3 screw can be used to fix the channel in place should a friction fit not be achieved.
A single 5.3mm hole is used to attach the mount to T-slot using an M5 bolt and T-nut.
This is my first CAD design so please use with that in mind.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
