Thingiverse

Max Z Effector

par JAW

10 Téléchargements

7 Likes

0 Makes

After printing and studying this design, I would advise against using it. The cooling tube would interfere with the delta arms in some places, limiting the printable area of the printbed. Check out my new version here: https://www.thingiverse.com/thing:2376295.

This is a beta (which may be updated periodically) for an end effector that holds most of the hotend above the effector plane to give more z height and reduce slop from play in parallel arms. The part is designed for an E3D V6 Hotend and a 30mm cooling fan. The effector is also setup to receive a 5/16 o.d. (8mm) tube that will supply compressed air to blow on the filament (either via a blower fan or an aquarium air pump).

Print Settings: PETG
Sliced with CURA
Layer Height at .2mm
Supports: Yes
Brim: Yes

Actual pictures to come!

delta effector e3d end effector effector end effector kossel Kossel-Mini kossel mini kossel xl delta effector e3d end effector effector end effector kossel Kossel-Mini kossel mini kossel xl delta effector e3d end effector effector end effector kossel Kossel-Mini kossel mini kossel xl delta effector e3d end effector effector end effector kossel Kossel-Mini kossel mini kossel xl

Source

Thingiverse

Ce qu'il faut pour imprimer: Débutant Confiance faible

Monobloc

Supports 1/3

Assemblage 0/3

Réglages 1/3

Taille du plateau 0/3

Post-traitement 0/3

Imprimante

FDM / FFF

Format de fichier