Thingiverse
MG Mount
door madsgadeberg
50
Downloads
30
Likes
0
Makes
MG mount.
A Rigid, Simple and lightweight mount for the Creality Ender family. It features the Orbiter Extruder, E3d v6 hotend, BLTouch and a 5015 Part cooler.
The complete toolhead with Carriage, wheels and all bolts weighs only 350grams. I print with 200mm/s and 1500mm/s^2 using Marlin on an ender 5 plus.. The results are pretty nice.
The Chute is a "slide in" that requires no bolts. Easy to remove if ABS or similar is printed.
Print settings
- layerheight: 0,2
- Perimeters: 5
- infill: 40%
- Supports: Touching buildplate
- Material: ABS or ASA
Bolts:
- Base: i only installed the 3 outer bolts. Very rigid.
- BLTouch: original ones. Thread cut directly in plastic
- Hotend bracket: M3x16. Thread cut directly in plastic
- Fan bolt: M4x20
- Extruder Bolts: M3x8
A Rigid, Simple and lightweight mount for the Creality Ender family. It features the Orbiter Extruder, E3d v6 hotend, BLTouch and a 5015 Part cooler.
The complete toolhead with Carriage, wheels and all bolts weighs only 350grams. I print with 200mm/s and 1500mm/s^2 using Marlin on an ender 5 plus.. The results are pretty nice.
The Chute is a "slide in" that requires no bolts. Easy to remove if ABS or similar is printed.
Print settings
- layerheight: 0,2
- Perimeters: 5
- infill: 40%
- Supports: Touching buildplate
- Material: ABS or ASA
Bolts:
- Base: i only installed the 3 outer bolts. Very rigid.
- BLTouch: original ones. Thread cut directly in plastic
- Hotend bracket: M3x16. Thread cut directly in plastic
- Fan bolt: M4x20
- Extruder Bolts: M3x8
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
