Microchip MPLAB SNAP case

This is a case for the Microchip MPLAB SNAP debugger. On the top of the case, grooves were added for labeling. There is a pdf file with 3 different designs and 5 different colors to choose. STEP file for customization and remakes of the case is also available. PrintingOrient the top part with the groove facing up (supports must be turned on for printing). The bottom of the box can be oriented facing down, towards the bed. Use outer brim or mouse ears when slicing.There is a 0.1mm gap between the walls of the lid and the bottom for easy assembly. They snap together nicely and no extra glue is required. In case they are loose, reprint the bottom, with 0.1mm x-y compensation.Print the labels and optionally laminate the print. Use a pin on all corners, marked with dots to guide your cuts. The guidelines will help you to position your ruler, when cutting.For better visibility of the LEDs, insert two small pieces of transparent filament in the holes on the top of the box, before sticking the