Thingiverse
Minecraft lantern
by xeoqs
10
Downloads
35
Likes
0
Makes
## Description
My take on the Minecraft lantern, takes standard E27 light bulbs. The light bulb receptacle should have a 35mm base and be at most 2cm tall on the interior part, and will probably have to be glued in. All other parts are friction fit
## Print
**Printer:** Ender 3
**Printer mods:** SKR Mini V3 motherboard, glass bed, dual screws, BL Touch, Sprite extruder
**Layer height:** 0.2mm (you can print any layer height on everything except the sides, which are designed to be 1 layer thick)
**Material:** Orange PLA, Black matte PLA
**Temperature:** Bed: 60, Nozzle: 200
## Assembly
The lantern will be friction fit assembled, with the exception of needing to glue in the receptecle, I used double sided tape and it was strong enough.
There is no order of assembly just stick it together, except the bottom comes last.
My take on the Minecraft lantern, takes standard E27 light bulbs. The light bulb receptacle should have a 35mm base and be at most 2cm tall on the interior part, and will probably have to be glued in. All other parts are friction fit
**Printer:** Ender 3
**Printer mods:** SKR Mini V3 motherboard, glass bed, dual screws, BL Touch, Sprite extruder
**Layer height:** 0.2mm (you can print any layer height on everything except the sides, which are designed to be 1 layer thick)
**Material:** Orange PLA, Black matte PLA
**Temperature:** Bed: 60, Nozzle: 200
## Assembly
The lantern will be friction fit assembled, with the exception of needing to glue in the receptecle, I used double sided tape and it was strong enough.
There is no order of assembly just stick it together, except the bottom comes last.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
