MiSTer-Console-Case

I wanted a MiSTer case that routed all the cables out the back, and felt like a retro game console itself.

Some soldering is required. The power switch, is wired to the barrel jack, and the result is split out to feed the usb hub using a couple dupont connects ( work well enough ) and a barrel plug for the DE-10 nano board.

button and led wiring is detailed in the README.md

I use 2 monster joystick branch 9pin game controller adapters, a zero4u powered USB hub, and custom wiring for the LED and buttons instead of a MiSTer IOBoard.

Ports are routed to the back: power, hdmi, ethernet, and 2 USB using commonly available panel mount extensions and a barrel jack.

To assemble, the 3 front panel pieces should be fitted together and glued. The 2 side panels then glued into the form of the front panels. The top 2 panels need to be filed to fit depending on the accuracy of your printer, and glued together. Then I use brass-threads for M3 screws to bind the front panel and sides