Slicer Discord
Mothman  – 3D-printbaar model van MakerWorld MakerWorld
Creatures

Mothman

44 Downloads
23 Likes
22 Makes
Model downloaden
Looming at nearly five feet tall, the Mothman is a gaunt, humanoid figure shrouded in mystery and terror. Its body is wiry and sinewy, wrapped in dark, leathery skin like weathered bat wings. From its back sprout enormous, veined wings—tattered yet powerful, always spread as if ready to take flight without warning.Its head is hunched low, almost insectoid, with no visible mouth—but two deep, hollow eye sockets glow with a haunting red shimmer, as if pulsing with unspoken warnings. The face is emotionless and mask-like, giving it an eerie, statue-like stillness. Its long arms end in clawed hands that dangle at its sides, twitching slightly when disturbed.Often spotted near old bridges or abandoned factories, this cryptid is whispered to be a harbinger of doom. Sightings are almost always followed by tragedy—disasters, collapses, disappearances. Witnesses report the sound of rustling wings, an unnatural silence before it appears, and an overwhelming sense of dread when it locks its gaze
Categorie
Creatures
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Gemiddelde betrouwbaarheid
Waarom?
supports nodig · grote print
Eendelig Supports vereist
Supports 2/3
Montage 0/3
Instellingen 1/3
Bedgrootte 2/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
Min. bedgrootte
200 mm (Groot)
Software
Cura, PrusaSlicer of vergelijkbaar
Veelgestelde vragen
Welke 3D-printer is geschikt voor Mothman ?
Elke FDM-printer zou goed overweg moeten kunnen met Mothman . Het is geprint op machines zoals Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. Een minimaal bouwvolume van 200 mm wordt aanbevolen.
Heeft Mothman supports nodig bij het printen?
Ja, Mothman heeft waarschijnlijk supports nodig vanwege overhangen en geometrie. We raden boom-supports in je slicer aan voor makkelijker verwijderen. Schakel supports in in Cura, PrusaSlicer of Bambu Studio vóór het printen.
In welk bestandsformaat is Mothman beschikbaar?
Mothman is beschikbaar in het formaat STL. Deze bestanden kunnen worden geopend en geslicet met gratis software zoals Cura, PrusaSlicer, Bambu Studio of OrcaSlicer voor FDM-printen, of ChiTuBox en Lychee Slicer voor resin-printen. De download wordt aangeboden via MakerWorld.
Is Mothman gratis te downloaden?
Ja, Mothman is gratis te downloaden via MakerWorld. Controleer altijd de licentie op het oorspronkelijke platform om commercieel gebruik, remixen en naamsvermelding te begrijpen.
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie