NICO ROBIN (ONE PIECE) – 3D printable model from MakerWorld

MakerWorld

Hueforge & Lithophane

NICO ROBIN (ONE PIECE)

by benito valentin · Hueforge & Lithophane

2 Downloads

11 Likes

0 Makes

Go to Model

Project: nico.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 101.27x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyTerra Army Blue Transmission Distance: 0.3 PLA BambuLab Basic Orange Transmission Distance: 7 PLA Bambula matte Mandarin orange Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Army Blue At layer #10 (0.88mm) swap to Orange At layer #12 (1.04mm) swap to Mandarin Orange At layer #19 (1.6mm) swap to Beige At layer #25 (2.08mm) swap to Jade White for the rest.

HUEFORGE HueForge Hueforge hueforge anime anime 2d art 2d comics ONE PIECE One Piece nico

Category

Hueforge & Lithophane

Source

MakerWorld

Published

28.03.2025

Updated

30.04.2026

What you need to print this: Beginner Low confidence

Why?

print-in-place design

Print-in-place

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

170 mm (Medium)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for NICO ROBIN (ONE PIECE)?

Any FDM printer should handle NICO ROBIN (ONE PIECE) just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 170 mm is recommended.

Does NICO ROBIN (ONE PIECE) need supports when printing?

Nope — NICO ROBIN (ONE PIECE) is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

What file format is NICO ROBIN (ONE PIECE) available in?

NICO ROBIN (ONE PIECE) is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is NICO ROBIN (ONE PIECE) free to download?

Yes, NICO ROBIN (ONE PIECE) is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL