OpenAstroTracker electronics box

My version of a box for the OpenAstroTracker electronics, NEMA17.
All the electronics are in one main box with a small connector box mounted on the OAT itself. The two are connected with rj45 patch cable / keystones.
Note that this is probably pushing the rj45 cable to it's current carrying capacity as it is carrying the power to the steppers and not just data signals. Use at your own risk!
The steppers are wired into the connector box using standard JST-XH sockets soldered to small pieces of veroboard. These slide into slots in the connector back.
The conenctor box is mounted to the OAT 20x20 with M4x30mm & T-nuts.
In the main box, the LCD/button shield is attached to the lid with 4 small screws, use an M3 nut as a spacer between the two PCBs of the shield. The Mega is just pushed onto the back of the shield.
There are 2 holes for 5.5x2.1 sockets, one for 9/12v IN and one for (in my case) 8v OUT to my Canon camera. There are mounting clips in the base for a buck for this OP.