Thingiverse
Opening Pick
von jq910
713
Downloads
661
Likes
2
Makes
Also available at: https://www.printables.com/model/557752-opening-pick
An opening pick similar to the iFixit one for prying open electronics and slicing apart adhesives.
There are 2 versions: the 0.6mm version is more flexible and closer to the original iFixit opening pick's 0.5mm thickness while the 1.2mm version more rigid and durable
Print at 0.08mm layer height (or lowest possible)
Wait for the pick to cool down before removing it from the build plate to avoid deforming the thin plastic.
Warranty void if used as guitar pick
An opening pick similar to the iFixit one for prying open electronics and slicing apart adhesives.
There are 2 versions: the 0.6mm version is more flexible and closer to the original iFixit opening pick's 0.5mm thickness while the 1.2mm version more rigid and durable
Print at 0.08mm layer height (or lowest possible)
Wait for the pick to cool down before removing it from the build plate to avoid deforming the thin plastic.
Warranty void if used as guitar pick
jq910 veröffentlicht auch auf
43 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
