Thingiverse
Opening Pick
by jq910
713
Downloads
661
Likes
2
Makes
Also available at: https://www.printables.com/model/557752-opening-pick
An opening pick similar to the iFixit one for prying open electronics and slicing apart adhesives.
There are 2 versions: the 0.6mm version is more flexible and closer to the original iFixit opening pick's 0.5mm thickness while the 1.2mm version more rigid and durable
Print at 0.08mm layer height (or lowest possible)
Wait for the pick to cool down before removing it from the build plate to avoid deforming the thin plastic.
Warranty void if used as guitar pick
An opening pick similar to the iFixit one for prying open electronics and slicing apart adhesives.
There are 2 versions: the 0.6mm version is more flexible and closer to the original iFixit opening pick's 0.5mm thickness while the 1.2mm version more rigid and durable
Print at 0.08mm layer height (or lowest possible)
Wait for the pick to cool down before removing it from the build plate to avoid deforming the thin plastic.
Warranty void if used as guitar pick
jq910 also publishes on
44 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
